China Hot selling aluminum worm speed gearboxes HMRV090 combined worm gearbox

Relevant Industries: Marketing Company
Gearing Arrangement: Worm
Output Torque: 2.6 to 1760
Enter Velocity: 700rpm, 1400rpm, 2800rpm
Output Velocity: 7-560rpm
Coloration: Silver, blue, gray
Packing: Carton & Plywood case
Packaging Specifics: modest carton for every gearbox plywood situation(a hundred and ten*110*.85m) for outdoors
Port: ZheJiang , HangZhou

Expensive client, we are prepared to serve for you!

Major attributes of aluminum worm speed gearboxes
one. broad pace ratio variety
two. little volume, reduced excess weight, occupying little area for mounting
3. higher performance, higher mechanical energy and high top quality aluminum alloy housing
4. prolonged life service, large output torque, minimal sound and minor vibration
five. low temperature increase, omnibearing set up, easy to connect with other machinery
six. large carry potential, elegant physical appearance
seven. CE normal, enter energy can be .18KW-15KW
8. steady transmission


Type: Very good top quality aluminum worm pace gearboxes HMRV090
Design: HMRV
Ratio: 5:1, 7.5:1, 10:1, fifteen:1, twenty:1, twenty five:1,
thirty:1, 40:1, 50:1, 60:1, 80:1, one hundred:1
Coloration: Blue, Silver, Gray, Customised (Damp painting, oven painting)
Substance: Housing, go over, flange(size30-90): aluminum alloy
Housing, protect, flange(size110-one hundred fifty): solid iron
Worm equipment: bronze for exterior & nodular iron for inside of
Worm shaft: 20CrMnTi with carburizing and quenching,
Floor harness: 56-62HRC
Output shaft: chromium steel-forty five#
Bearing: C&U manufacturer, HCH brand
Oil Seal: CZPT SKF
Packing: Carton and Picket Circumstance
Guarantee: 1 Yr
IEC Flange: 56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100/112B5, a hundred/112B14, 132B5
Lubricant: Synthetic oil & Mineral oil

Our Providers
We are top WORM Equipment reducer factory
Sell directly to customers to much more than twenty countries like India, Turkey, Spain, Brazil, Russia, Poland, and so on.
Our whole product sales revenue for 2014 was $ten.5 MILLION USD.
Our goods have Constant Large High quality and Lower Price. We have our very own Aluminum Casting manufacturing unit which guarantees the quality of the products and permit us to supply competitive value.
We do CUSTOMISED products.
Also, we are extremely wonderful folks to deal with.
Welcome to Go to OUR Manufacturing facility!

Benefits of our manufacturing unit
Edge 1 — Alluminium Casting Devices & Examination Amenities
The proprietor of HMRV factory, Mr Lu also has an aluminum die casting manufacturing facility with 100% inventory. This aluminum die casting manufacturing unit is the ideal in our HangZhou. We make HMRV housing, cover, flange and provide to other HMRV factory.

Edge 2 — Adequate Stock of Spares
To make certain our client fast produce time, we have enough stock of spares this kind of as housing, go over, input flange, output flange, worm wheel, worm gear, oil seal, bearing.

Benefit 3 — Ideal Machines in China
The owner of HangZhou Reducer, Mr Lu, is the sales representatives of the Chinese largest tool products factory in ZHangZhoug province. He sells a lot of hobing equipment, gridding device, CNC device and so on to other factory. As to the device equipment in our factory, all of them are gear with greatest processing precision with strong complex support.

Query One:
What infomation need to I explain to you to verify the purchase?
A: Model/Measurement, Transmission Ratio, Shaft directions & Buy quantity.

Query Two:
What if I really don’t know which 1 I need to have?
A:Do not worry, Send out as a lot information as you can, our specialized group will assist you to uncover the correct model/dimension you are seeking for.

Issue A few:
How long need to I wait for the suggestions right after I deliver the enquiry?
A: Inside of 12 several hours

Query Four:
What must I supply if I want to buy NON-STANDERD reducers?
A: Drafts, Dimensions, Photos and samples if feasible.

What is a worm gear reducer?

A worm gear reducer is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer can increase the output torque of the engine according to the gear ratio. This type of gear reducer is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.

Hollow shaft worm gear reducer

The hollow shaft worm gear reducer is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducers are usually used in combination with helical gear reducers. The latter is mounted on the input side of the worm gear reducer and is a great way to reduce the speed of high output motors. The gear reducer has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducers are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducers can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducers use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.

Self-locking function

One of the most prominent features of a worm reducer is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducers. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.

Size of worm gear reducer

Worm gear reducers can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducers great for space-saving applications. They also have low initial costs.
Worm gear reducers are one of the most popular types of speed reducers. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

China Hot selling aluminum worm speed gearboxes HMRV090     combined worm gearboxChina Hot selling aluminum worm speed gearboxes HMRV090     combined worm gearbox

worm gearbox

As one of leading worm gearbox manufacturers, suppliers and exporters of mechanical products, We offer worm gearbox and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of worm gearbox.

Recent Posts