small worm gearbox

Small Precison Worm Decrease Gearboxes
There are many of specifications you will have to consider when making a worm gearbox selection.
First, what is the insight and output torque requirements? Next, verify vendor horsepower/torque charts and pick the correct worm equipment reducer.
If how big is the gearbox will be an important consideration after that check the reducer dimension specs, not all producers make compact units. In fact, working with the proper supplier can help you not only find the right equipment reducer but also prevent some of the most common errors in reducer selection. We provide a free guide to help you find the right supplier to utilize.
For low and fractional horsepower application you can expect two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output are the major differences between these two models. Both feature the hollow or solid output shaft. Both versions are compact and offer users a wide selection of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your unique application or task is vital to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes on top and bottom
• Flush fitting bearing caps easy to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is required. This right angle gear motor is so versatile it can work just about anyplace.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a Small Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power offers designed and built unique, high precision mini gearboxes that can’t be found somewhere else. Our miniature gearboxes are available in numerous configurations, including worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that are designed and created to meet your specific specifications.
Contact us for the mini gearbox your application requires, or demand a quote upon a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, speed reducers, equipment drives, and gearmotors. All terms can be used pretty much interchangeably. Please be aware that the links for our small gear drives include information on the full selection of frame sizes for that series or style.
Bevel Box Micro Equipment Drive
Our bevel box miniature gear drives are application rated for the optimum balance of functionality and cost. Torque could be balanced to meet your RPM and working life requirements. Light-weight with low backlash overall performance (less than 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a compact package. They provide an result shaft at 90° from the input, and are available in gear small worm gearbox ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminium housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc a few minutes of backlash or better. Also called “shaft to bore gearboxes,” these devices provide a single insight shaft that protrudes from reverse sides of the casing; output is usually a keyed bore. Standard one- and double-end shafts are available and given keys and retainer rings. An array of gear ratios and insight sizes are available to meet your preferences.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and permanent lubrication. They provide two input shafts on opposing sides of the frame, with two result shafts perpendicular to the input shafts. Our mini 4 shaft worm equipment drives deliver high efficiency overall performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes generate an output at 90° from the insight. They deliver superior overall performance in a wide variety applications and are constructed with small footprints, making them ideal for procedures where space is bound. They offer high effectiveness with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and are rated for boosts to 3,000 RPM. Aluminum housings and stainless steel gears and shafts make these inline spur gearboxes challenging and corrosion resistant, for your most demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm gear reducers deliver superior performance with high efficiency, and show rugged building for challenging power transfer functions. Available in three gear ratios (5:1, 10:1, 20:1), our small worm gearboxes are designed in extremely small footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a customized miniature gearbox to meet your unique specifications. We can produce custom micro gearboxes in virtually any configuration your application requires, with output torque amounts as high as 900Nm. We can work from your gearbox styles, reverse engineer an existing unit, or assist you to develop an all-new style that provides the performance you will need. Ask for a quote on a custom miniature gearbox or contact us to discuss your unique requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and unique ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and result shafts with drive crucial and retainer rings could be supplied to your specifications for any of our hollow bore miniature gearboxes. We provide a basic selection of solitary ended or dual ended shafts to put together in these gearboxes. All gearbox shafts are supplied with keys and retainer bands.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For E series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our program engineers to discuss your particular needs.
We offer a broad collection of misalignment shaft couplings in inch and metric bore sizes. Inch and metric precision floor shafts are available from stock.
Contact Us for POWERFUL Miniature Gearboxes
We are the miniature gearbox specialists. Our micro gear drive models deliver superior efficiency in a little footprint, and are tough enough for challenging function environments. Contact us to find out more about our mini gearboxes, or request a quote on a custom model that’s tailored to your needs.
Additional benefits of worm drive gearboxes include: