The high-end economy lines GSN & GFE combine high performance with economic efficiency: both lines are also equipped with helical ground gears, ensuring a minimum noise level and smooth running. The entire needle bearing has been especially designed to reach high torques that defeat the competition for units of the same size. All planetary carriers are produced as a cage created from solid materials. This increases peaceful operating characteristics while at the same time improving positioning precision and reducing backlash. Yet another shaft sealing band ensures maximum dust and splash water security in accordance with protection course IP65 in every lines.
One way to reduce backlash is by using precision gears. The concentrate on manufacturing in precision gears is certainly tighter tolerances, so all over the gear will be a tighter, more precise suit. And the tighter fit means much less play in the apparatus teeth, which is the cause of backlash in the first place. Of course, precision gears are more expensive, but if the application calls for high accuracy, after that precision gearing may be the way to go.
From a equipment design perspective, an easy way to lessen backlash is to make sure one’s teeth mesh tightly together. This is typically done by shortening the center distance between gears. As for pre-loading, this can be done utilizing a spring mechanism to carry the gears firmly in place. This also eliminates the play between the gear teeth and therefore eliminates backlash.
Of course, the kind of gears used may also have a large impact on the amount of backlash. So for instance, some gear types such as stress wave gears, or harmonic equipment drives, possess zero backlash.
The GSD, GSB & GSBL high-end gearbox lines are constructed in a space-optimized, two-stage design. Because of the lower torque ideals, the input stage can be dimensionally smaller compared to the result stage. Its short design makes the GSD range the ideal high-end gearbox for space restricted applications. The low regular backlash of the GSD range makes it an ideal fit for highly powerful applications where highest positioning and acceleration accuracy is necessary. The flange output creates highest torsional rigidity. For the lodging of particularly high axial loads, taper roller bearings are elective in sizes with 90 mm diameter or higher. The GSB line stands for high performance in combination with low backlash and high precision. Its robust, one-piece housing permits a high gearbox rigidity and the absorption of high radial and axial loads. The angular gearboxes of the GSBL series offer the same advantages as the GSB series; the right angle form makes the GSBL series an ideal match for all powerful applications where space is bound.