Our worm gear reducers offer a choice of a good or hollow output shaft and feature an adjustable mounting placement. Both SW-1 and the SW-5, nevertheless, can endure shock loading much better than other decrease gearbox designs, making them well suited for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Rate Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s rate reducer products – has been serving industry reliably for over 40 years. Its tested modular style has set the market standard for efficiency and may be the most imitated item in today’s worm gear quickness reducer market. But why settle for a knock-off when you can have the original – from EP Gear.
Specifications
11 basic one reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting flexibility allows for installation in practically any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, in addition to greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings can be found in our eCatalog.
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are tough and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high insight speeds, or when gearmotor performance is important. Contact our technical sales personnel for help determining which gearbox solution is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers are designed with a hollow bore and allow for a corner convert with optional dual output. The reducers come in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes were created with five mounting options providing flexibility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The proper angle bevel gearbox combines the top features of our correct angle worm and planetary inline reducers. With a good and efficient correct angle configuration, our correct angle planetary gearboxes offer a robust solution. The right angle bevel gearbox will come in 18 ratios which range from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series small planetary gearbox configurations supply the smallest footprint and quietest procedure of our rate reducers. These gearboxes are made to manage varying loads with small backlash. With body sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we have a solution to suit your needs. Our 52 frame size can be available with plastic-type material gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest effectiveness and best output torque of all our swiftness reducers. These gearboxes are made to manage varying loads with little backlash. Planetary gear reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we have a solution to fit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the top choice for constant duty applications. Their equipment cluster design provides a highly effective method for dissipating heat. Parallel shaft gearboxes have the shortest length of our inline gear reducer options therefore they work very well in conditions with limited space. Our parallel shaft gear reducers provide an affordable drop-in replacement solution for most little parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right angle gearboxes, rate reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement in which a equipment in the form of a screw, also referred to as a worm, meshes with a worm equipment. These gears are typically created from bronze and the worms are steel or stainless steel.
While worm gears act like a spur gear, the worm gearboxes are considerably smaller than other gear reduction boxes. A main benefit of worm gear reducers is definitely that they create an output that’s 90° from the input and can be utilized to transmit higher torque or decrease rotational speed. Frequently, a worm gearbox provides right hand threads; to change the direction of the result, a left-hands thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio
Visit our 
site for more information details concerning worm reduction gearbox.