Our worm equipment reducers offer an option of a solid or hollow result shaft and feature an adjustable mounting position. Both the SW-1 and the SW-5, nevertheless, can endure shock loading much better than other decrease gearbox styles, making them ideal for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Rate Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s swiftness reducer product line – has been serving industry reliably for over 40 years. Its verified modular style has set the industry standard for overall performance and is the most imitated item in the current worm gear swiftness reducer marketplace. But why accept a knock-off when you can have the original – from EP Gear.
11 basic solitary reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility allows for installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, in addition to greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Right angle gearboxes (worm and planetary) are durable and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high input speeds, or when gearmotor performance is important. Contact our technical sales staff for help identifying which gearbox option is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers were created with a hollow bore and invite for a corner change with optional dual result. The reducers come in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes are designed with five mounting choices providing versatility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
The right angle bevel gearbox combines the features of our correct angle worm and planetary inline reducers. With a good and efficient right angle configuration, our right angle planetary gearboxes provide a robust solution. The right angle bevel gearbox will come in 18 ratios ranging from 5:1 to 1000:1, and it is back-drivable at all ratios.
I-SERIES PLANETARY GEARBOX
Our I-Series little planetary gearbox configurations supply the smallest footprint and quietest procedure of our quickness reducers. These gearboxes are designed to deal with varying loads with small backlash. With body sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size can be available with plastic-type material gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
Our inline planetary gearbox configurations supply the highest effectiveness and best result torque of all our velocity reducers. These gearboxes are created to deal with varying loads with little backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio choices ranging from 5:1 to 1000:1, we have a solution to suit your needs.
PARALLEL SHAFT GEARBOX
Parallel shaft gearboxes are the best choice for constant duty applications. Their gear cluster design provides an effective method for dissipating warmth. Parallel shaft gearboxes have the shortest amount of our inline equipment reducer options therefore they work very well in environments with limited space. Our parallel shaft equipment reducers provide an affordable drop-in substitute solution for most small parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, speed reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement when a equipment in the form of a screw, also called a worm, meshes with a worm gear. These gears are typically created from bronze and the worms are metal or stainless steel.
While worm gears are similar to a spur gear, the worm gearboxes are significantly smaller than other gear reduction boxes. A major benefit of worm equipment reducers is definitely that they produce an output that is 90° from the input and can be used to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox provides right hand threads; to change the path of the result, a left-hands thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio
If you need a lot more truths concerning Worm Reduction Gearbox click and get accessibility to even more short articles!