• Motor gearboxes are maintenance-free, small power sources for driving vent, display, house and flap ventilation systems in greenhouses.
• Single phase and three phase choices for your individual needs.
• Key feature of the drives certainly are a self-braking worm equipment transmission and an integral linear limit switch unit.
shaft-installed gear motors are complete electromechanical drives in which the speed of the installed electric motor is reduced to the required value using two to 4 reduction stages. The drives are high performance and durable and show a compact and lightweight design.
The compact design is made possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also include a 60 to 70 percent weight reduction compared to commercially offered drive motors. That is accomplished through the consistent application of light weight aluminum die casting technology, which guarantees a high degree of rigidity for the apparatus and motor housing at the same time.
Each drive is produced and tested specifically for each order and customer. A advanced modular system permits a great diversity of types and a maximum degree of customization to client requirements.
Because of their integrated control units, the shaft-mounted gear motors are the ideal drives for applications in reversing setting. In both rotation directions, described end positions are shielded by two position limit switches. This uncomplicated remedy does not just simplify the cabling, but also can help you configure the finish positions efficiently. The high shut-off precision of the limit switches guarantees safe operation moving forwards and backwards.
This gearmotor integrates a gearbox, a power motor, and limit switches. It really is connected with a steel shaft to carefully turn the pinions for greenhouse ventilation. With the support of electrical panel, it could run and then stop after set quantity of turns. Then it can open up and close the home windows for greenhouse ventilation to correct positions.
To keep the delicate environment in the greenhouse, climate control systems certainly are a necessity. Many mechanical systems can be applied in this respect; however glass vent drive systems have a tendency to be the most famous. The drive system consists of a central gearmotor connected to a 40:1 right angle reducer with dual result shafts. These OP shafts hook up to long jack shafts that spread across the roof type of the greenhouse linking to multiple rack and pinion mechanisms that open and close large glass windows panes in the ceiling for temperature control.
With respect to the size of the application form (amount of the shafting, volume and weight of the screen panes) we provides two gearmotor solutions from a modified edition of their 200 series parallel shaft series – 1/5 HP and 1/20 HP. The application Is generally intermittent used; nevertheless the motors are ranked continuous because the glass pane home windows 
may potentially be under constant, subtle adjustment during the day.
Gear Motor, also known as Motor Gearboxes, is a particular kind of electrical motor that is designed to generate high torque whilst maintaining a minimal horsepower, or low speed, motor output. Equipment motors are available in many different applications, specifically for the greenhouse, livestock and agricultural market, our motors are available options to operate roof vents, wall structure vents,roof shading and screening, they attach to the shaft with chain couplings that compensate for alignment errors and can be easily eliminated without disturbing the whole shaft.
shaft-mounted gear motors are comprehensive electromechanical drives where the speed of the installed electric motor is reduced to the required value using two to four reduction stages. The drives are high performance and durable and feature a compact and lightweight design.
Call us if you have questions regarding greenhouse gear motor.