Product Description
Product Description
Product Description
-S Series Helical gearbox
Solution Functions
one.Substantial modular design.
2.Built-in casting housing,compact dimension,high loading assist, steady transmitting and low noise amount.
three.With the particular equipment geometry, it receives higher torque, efficiency and lengthy existence circle.
4.It can attain the immediate combination for 2 sets of gearbox.
five.Substantial efficiency and preserve power.
six.Save cost and minimal servicing.
Merchandise Parameters
one. Technical data
Size | 38 | forty eight | fifty eight | 68 | seventy eight | 88 | 98 |
Framework | BS BSA BSF BSAF BSAT BSAZ | ||||||
Input Power(kW) | .18~.seventy five | .18~1.five | .eighteen~three | .twenty five~5.five | .fifty five~7.five | .75~15 | 1.5~22 |
Ratio | 10.27~a hundred sixty five.71 | eleven.forty six~244.seventy four | 10.seventy eight~196.21 | eleven.55~227.twenty | 9.96~241.09 | 11.83~223.26 | 12.seventy five~230.forty eight |
Permissible Torque(N.m) | 90 | a hundred and seventy | 300 | 520 | 1270 | 2280 | 4000 |
Fat(kg) | seven | ten | fourteen | 26 | 50 | one hundred | 170 |
2: Design choice
S series gear units are available in the following designs | |
S…Y… | Foot-mounted parallel shaft helical gear units with solid shaft |
SA…Y… | Parallel shaft helical gear units with hollow shaft |
SAZ…Y… | Limited-flange mounted parallel shaft helical gear units with hollow shaft |
SF…Y… | Flange-mounted parallel shaft helical gear units with solid shaft |
SAT…Y… | Flange-mounted parallel shaft helical gear units with hollow shaft |
S(SF,SA,SAF,SAZ)S… | Shaft input parallel shaft helical gear units |
S(SF,SA,SAF,SAZ)…R…Y… | Combinatorial parallel shaft helical gear units |
S(SF,SA,SAF,SAZ)S…R… | Shaft input combinatorial parallel shaft helical gear units |
Resources Information Sheet
Housing substance |
Grey Solid iron |
Housing hardness |
HBS163~255 |
Gear content |
20CrMnTi alloy metal |
Area hardness of gears |
HRC58°~62 ° |
Gear core hardness |
HRC33~forty eight |
Input / Output shaft substance |
40Cr alloy metal |
Input / Output shaft hardness |
HRC32~36 |
Machining precision of gears |
precise grinding, 6~5 Grade |
Lubricating oil |
GB L-CKC220-460, Shell Omala220-460 |
Warmth treatment method |
tempering, cementiting, quenching, normalizing, and so on. |
Efficiency |
94%~96% (depends on the transmission phase) |
Noise (MAX) |
60~68dB |
Temp. increase (MAX) |
40°C |
Temp. increase (Oil)(MAX) |
50°C |
Vibration |
≤20µm |
Backlash |
≤20Arcmin |
Manufacturer of bearings |
China best brand name bearing, HRB/LYC/ZWZ/C&U. Or other makes requested, SKF, FAG, INA, NSK. |
Brand name of oil seal |
NAK — ZheJiang or other makes requested |
Detailed Images
Our process of production
Our product line
Business Profile
Firm Profile
Bode was established in 2007, which is positioned in HangZhou city, ZHangZhoug province. As 1 expert maker and exporter, we have far more than 17 years’ knowledge in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare areas. We have manufacturing unit with advanced production and take a look at gear, the powerful growth of team and producing potential supply our customers with substantial quality products. Our products broadly served to numerous industries of Metallurgy, Substances, lifting, mining, Petroleum, textile, medication, picket and so on. Main marketplaces: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to inquire us any inquiries, good offer you constantly for you for long term business.
FAQ
Q1: Are you buying and selling company or company?
A: We are manufacturing facility.
Q2: What types of gearbox can you make for us?
A: Principal products of our company: R, S, K, F collection helical-tooth reducer, RV collection worm equipment reducer,H Collection Parallel Shaft Helical Reduction Equipment Box
Q3: Can you make as for every personalized drawing?
A: Sure, we offer personalized service for clients.
Q4: Can we purchase 1 pc of each and every item for top quality testing?
A: Of course, we are happy to accept trial get for quality testing.
Q5: What data shall we give prior to inserting a purchase order?
A: a) Kind of the gearbox, ratio, enter and output type, enter flange, mounting position, and motor informationetc.
b) Housing shade.
c) Obtain amount.
d) Other specific demands.
Q6: How lengthy is your shipping time?
A: Generally it is 5-10 days if the products are in stock. or it is 15-20 times if the goods are not in inventory.
Q7: What is your conditions of payment ?
A: thirty% Advance payment by T/T soon after signing the agreement.70% ahead of supply
If you are intrigued in our item, welcome to speak to with us.
Our team will do our best to fulfill your need 🙂
US $90-5,500 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Marine, Agricultural Machinery |
---|---|
Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
Layout: | Coaxial |
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Step: | Double-Step |
###
Samples: |
US$ 90/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Size | 38 | 48 | 58 | 68 | 78 | 88 | 98 |
Structure | BS BSA BSF BSAF BSAT BSAZ | ||||||
Input Power(kW) | 0.18~0.75 | 0.18~1.5 | 0.18~3 | 0.25~5.5 | 0.55~7.5 | 0.75~15 | 1.5~22 |
Ratio | 10.27~165.71 | 11.46~244.74 | 10.78~196.21 | 11.55~227.20 | 9.96~241.09 | 11.83~223.26 | 12.75~230.48 |
Permissible Torque(N.m) | 90 | 170 | 300 | 520 | 1270 | 2280 | 4000 |
Weight(kg) | 7 | 10 | 14 | 26 | 50 | 100 | 170 |
###
S series gear units are available in the following designs | |
S…Y… | Foot-mounted parallel shaft helical gear units with solid shaft |
SA…Y… | Parallel shaft helical gear units with hollow shaft |
SAZ…Y… | Short-flange mounted parallel shaft helical gear units with hollow shaft |
SF…Y… | Flange-mounted parallel shaft helical gear units with solid shaft |
SAT…Y… | Flange-mounted parallel shaft helical gear units with hollow shaft |
S(SF,SA,SAF,SAZ)S… | Shaft input parallel shaft helical gear units |
S(SF,SA,SAF,SAZ)…R…Y… | Combinatorial parallel shaft helical gear units |
S(SF,SA,SAF,SAZ)S…R… | Shaft input combinatorial parallel shaft helical gear units |
###
Housing material
|
Grey Cast iron
|
Housing hardness
|
HBS163~255
|
Gear material
|
20CrMnTi alloy steel
|
Surface hardness of gears
|
HRC58°~62 °
|
Gear core hardness
|
HRC33~48
|
Input / Output shaft material
|
40Cr alloy steel
|
Input / Output shaft hardness
|
HRC32~36
|
Machining precision of gears
|
accurate grinding, 6~5 Grade
|
Lubricating oil
|
GB L-CKC220-460, Shell Omala220-460
|
Heat treatment
|
tempering, cementiting, quenching, normalizing, etc.
|
Efficiency
|
94%~96% (depends on the transmission stage)
|
Noise (MAX)
|
60~68dB
|
Temp. rise (MAX)
|
40°C
|
Temp. rise (Oil)(MAX)
|
50°C
|
Vibration
|
≤20µm
|
Backlash
|
≤20Arcmin
|
Brand of bearings
|
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
|
Brand of oil seal
|
NAK — Taiwan or other brands requested
|
US $90-5,500 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Marine, Agricultural Machinery |
---|---|
Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
Layout: | Coaxial |
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Step: | Double-Step |
###
Samples: |
US$ 90/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Size | 38 | 48 | 58 | 68 | 78 | 88 | 98 |
Structure | BS BSA BSF BSAF BSAT BSAZ | ||||||
Input Power(kW) | 0.18~0.75 | 0.18~1.5 | 0.18~3 | 0.25~5.5 | 0.55~7.5 | 0.75~15 | 1.5~22 |
Ratio | 10.27~165.71 | 11.46~244.74 | 10.78~196.21 | 11.55~227.20 | 9.96~241.09 | 11.83~223.26 | 12.75~230.48 |
Permissible Torque(N.m) | 90 | 170 | 300 | 520 | 1270 | 2280 | 4000 |
Weight(kg) | 7 | 10 | 14 | 26 | 50 | 100 | 170 |
###
S series gear units are available in the following designs | |
S…Y… | Foot-mounted parallel shaft helical gear units with solid shaft |
SA…Y… | Parallel shaft helical gear units with hollow shaft |
SAZ…Y… | Short-flange mounted parallel shaft helical gear units with hollow shaft |
SF…Y… | Flange-mounted parallel shaft helical gear units with solid shaft |
SAT…Y… | Flange-mounted parallel shaft helical gear units with hollow shaft |
S(SF,SA,SAF,SAZ)S… | Shaft input parallel shaft helical gear units |
S(SF,SA,SAF,SAZ)…R…Y… | Combinatorial parallel shaft helical gear units |
S(SF,SA,SAF,SAZ)S…R… | Shaft input combinatorial parallel shaft helical gear units |
###
Housing material
|
Grey Cast iron
|
Housing hardness
|
HBS163~255
|
Gear material
|
20CrMnTi alloy steel
|
Surface hardness of gears
|
HRC58°~62 °
|
Gear core hardness
|
HRC33~48
|
Input / Output shaft material
|
40Cr alloy steel
|
Input / Output shaft hardness
|
HRC32~36
|
Machining precision of gears
|
accurate grinding, 6~5 Grade
|
Lubricating oil
|
GB L-CKC220-460, Shell Omala220-460
|
Heat treatment
|
tempering, cementiting, quenching, normalizing, etc.
|
Efficiency
|
94%~96% (depends on the transmission stage)
|
Noise (MAX)
|
60~68dB
|
Temp. rise (MAX)
|
40°C
|
Temp. rise (Oil)(MAX)
|
50°C
|
Vibration
|
≤20µm
|
Backlash
|
≤20Arcmin
|
Brand of bearings
|
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
|
Brand of oil seal
|
NAK — Taiwan or other brands requested
|
Advantages and disadvantages of worm gear reducer gearbox
If you are looking for a worm gear reducer gearbox, you have come to the right place. This article will cover the pros and cons of worm gear reducer gearboxes and discuss the different types available. You will learn about multi-head worm gear reducer gearboxes, hollow shaft worm gear reducer gearboxes as well as hypoid gear sets and motors.
Hollow shaft worm gear reducer gearbox
Hollow shaft worm gear reducer gearboxes are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducer gearboxes depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducer gearboxes are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducer gearboxes are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducer gearboxes, there are also helical gear reducer gearboxes. These reducer gearboxes can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer gearbox is that it is more efficient than a single-stage gear reducer gearbox. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducer gearboxes are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.
Multi-head worm gear reducer gearbox
The multi-head worm gear reducer gearbox is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducer gearboxes have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer gearbox to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducer gearboxes are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
Hypoid Gear Set
Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.
Hypoid gear motor
A hypoid gear motor is a good choice for a worm gear reducer gearbox as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer gearbox can provide the same output as a 1/2 hp motor driving a worm reducer gearbox. A study by Agknx compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer gearbox when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducer gearboxes run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.
R series worm gear reducer gearbox
R series worm gear reducer gearboxes have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
AGKNX Electric Worm Gear reducer gearbox
AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
editor by czh 2023-02-05